|
HS Code |
686738 |
| Appearance | Translucent |
| Base | Polydimethylsiloxane |
| Type | Addition-curing silicone rubber |
| Mix Ratio | 1:1 by weight or volume |
| Viscosity | 23,000 mPa·s |
| Pot Life | 40 minutes at 25°C |
| Cure Time | 6 hours at 25°C |
| Shore A Hardness | 15 |
| Tensile Strength | 3.0 MPa |
| Elongation At Break | 400% |
| Tear Strength | 12 kN/m |
| Density | 1.10 g/cm³ |
| Linear Shrinkage | ≤0.1% |
| Operating Temperature Range | -60°C to 200°C |
| Color | Translucent white |
As an accredited DJSilicone NE-651 Silicone Rubber factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | DJSilicone NE-651 Silicone Rubber is typically packaged in a 1 kg white plastic tub with a secure, resealable lid and labeling. |
| Storage | DJSilicone NE-651 Silicone Rubber should be stored in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and moisture. Keep the container tightly sealed when not in use to prevent contamination and degradation. Store at temperatures between 5°C and 25°C. Avoid freezing and excessive heat to maintain product stability and performance. |
| Shipping | DJSilicone NE-651 Silicone Rubber is shipped in tightly sealed, moisture-resistant containers to preserve product quality. Containers should be kept upright, protected from direct sunlight, extreme temperatures, and physical damage during transit. Handle with care, following all safety guidelines and relevant transportation regulations for chemical materials. Store in a cool, dry location upon arrival. |
Competitive DJSilicone NE-651 Silicone Rubber prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
