|
HS Code |
534448 |
| Appearance | Translucent |
| Base Polymer | Silicone (Polysiloxane) |
| Type | Addition cure |
| Hardness Shore A | 40 |
| Viscosity | 85,000 mPa·s |
| Mixing Ratio | 1:1 (Base: Curing agent) |
| Pot Life | 90 minutes at 23°C |
| Curing Time | 10 hours at 23°C |
| Tensile Strength | 5.0 MPa |
| Elongation At Break | 400% |
| Tear Strength | 12 kN/m |
| Specific Gravity | 1.13 |
| Operating Temperature Range | -40°C to +200°C |
As an accredited Shin-Etsu KE-6080-U Silicone Rubber factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Shin-Etsu KE-6080-U Silicone Rubber is packaged in a 20 kg sealed metal pail, featuring detailed labeling and safe handling instructions. |
| Storage | Shin-Etsu KE-6080-U Silicone Rubber should be stored in tightly sealed original containers at a cool, dry, and well-ventilated location, away from direct sunlight and sources of heat or ignition. Recommended storage temperature is below 30°C (86°F). Avoid contamination with incompatible substances. Follow all safety guidelines and consult the product’s Safety Data Sheet (SDS) for further handling and storage information. |
| Shipping | Shin-Etsu KE-6080-U Silicone Rubber is shipped in securely sealed, moisture-resistant packaging, typically in drums or pails to prevent contamination. The material is classified as non-hazardous, but should be stored and transported in cool, dry conditions, away from direct sunlight, heat, and incompatible substances to maintain product quality and safety. |
Competitive Shin-Etsu KE-6080-U Silicone Rubber prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
