|
HS Code |
980923 |
| Appearance | Translucent |
| Base | Silicone |
| Type | One-component |
| Curing Method | Room temperature vulcanizing (RTV) |
| Consistency | Paste |
| Hardness Shore A | 20 |
| Tensile Strength Mpa | 2.1 |
| Elongation Percent | 400 |
| Specific Gravity | 1.06 |
| Skin Over Time Minutes | 8 |
| Cure Time 24h Mm | 2.5 |
| Dielectric Strength Kv Mm | 23 |
| Volume Resistivity Ohm Cm | 1.0 x 10^15 |
As an accredited Shin-Etsu KE-655-U Silicone Rubber factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Shin-Etsu KE-655-U Silicone Rubber is typically packaged in a 1 kg metallic can, sealed with a plastic lid, and labeled. |
| Storage | Shin-Etsu KE-655-U Silicone Rubber should be stored in its original, unopened containers at a cool, dry place away from direct sunlight and sources of heat. Ideal storage temperature is below 25°C (77°F). Ensure the area is well ventilated, and keep the material sealed to prevent contamination and moisture absorption. Avoid freezing and excessive humidity to maintain product quality and shelf life. |
| Shipping | Shin-Etsu KE-655-U Silicone Rubber is typically shipped in sealed containers to protect against moisture and contamination. Containers are securely packed and labeled according to international chemical safety standards. Shipping is conducted via ground, air, or sea freight, depending on quantity and destination, with appropriate documentation and handling precautions observed throughout transit. |
Competitive Shin-Etsu KE-655-U Silicone Rubber prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
