|
HS Code |
177185 |
| Product Name | Hytrel 5586 |
| Material Type | Thermoplastic Polyester Elastomer (TPE-E) |
| Density | 1.18 g/cm³ |
| Hardness Shore D | 55 |
| Tensile Strength At Break | 41 MPa |
| Elongation At Break | 420% |
| Flexural Modulus | 110 MPa |
| Melt Flow Rate 190 C 2 16 Kg | 6 g/10 min |
| Melting Point | 170°C |
| Service Temperature Continuous | Up to 120°C |
| Notched Izod Impact 23 C | No break |
| Moisture Absorption 24h | 0.22% |
As an accredited Hytrel 5586 (TPE-E) factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Hytrel 5586 (TPE-E) is typically packaged in 25 kg (55.1 lb) moisture-resistant, sealed bags with product labeling. |
| Storage | Hytrel 5586 (TPE-E) should be stored in a cool, dry place away from direct sunlight, heat sources, and moisture to preserve its properties. Keep the material in its original, tightly sealed packaging until use. Avoid contamination with dust, dirt, or other foreign substances. Optimal storage temperature is typically below 30°C (86°F) to prevent premature aging or degradation. |
| Shipping | Hytrel 5586 (TPE-E) is typically shipped in 25 kg (55 lb) polyethylene-lined bags or bulk containers to ensure material integrity and protection against contamination and moisture. Store and transport in cool, dry conditions, away from direct sunlight. Ensure compliance with safety regulations for thermoplastic elastomers during handling and shipping. |
Competitive Hytrel 5586 (TPE-E) prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
